SynLink PDUs feature a customizable 1.8" vibrant display with dynamic push button functionality. Keep scrolling to learn about the most versatile PDU control panel on the market.
A major benefit of having our engineers handle tech support is customer feedback quickly turns into product improvements.
In legacy PDUs, a recurring theme for tech support is helping users determine the PDU's dynamically assigned IP address. SynLink PDUs were designed to address this issue by displaying the assigned IP on the front panel.
Choose between DHCP and STATIC assignment with a few button presses.
Buttons with dynamic functionality make it easy to set an IPV4 static IP address.
Quickly identify the state of each switched outlet.
When toggling outlets on or off, you will be asked for final confirmation to prevent accidental shutdowns.
Choose a screensaver to show power metrics, outlet status, or go lights-out by turning the display off.
* Note: only available in firmware version 2.6.XX or later. Ask us for the update!
Rotate the screen for PDUs installed in different orientations or change the display brightness.
Apply a custom color theme.
Detect issues with phase balancing by scrolling through power metrics on the PDU input, circuit, and outlet levels. Check on energy consumed by connected equipment (KWH), useful in bill-back applications.
SynLink PDUs support up to two plug-n-play temperature & humidity sensors. Place one on the front of the rack and one on the back to get readings on the hot and cold aisles.
Subscribe to get notified about upcoming new sensors such as vibration detection, contact closure, and more.
Secure the PDU in remote installations by editing permissions that disable functionality. This prevents unauthorized or accidental tampering.
The example below uses the web UI to disable switching outlets or configuring networking parameters from the LCD interface.
Liked this article?
Let us know or request more screensavers by sending us a message.