How to Buy
2U Single Phase Switched Pro+ Dual
Power Capacity Planning Tool
Get a Quote
Add To Cart
Inlet Energy Monitor
Energy Metrics: Voltage (V), Current (A), Active Power (W), Line Frequency, Active Power, Active Energy, Reactive Energy, Power Factor
High Powered Multi Inlet
Multiple inlets for cost effective max power.
Outlet Current Meter
Current (A) is measured at each outlet
Relay Health Monitor
Proprietary firmware keeps track of key relay health indicators to alert the user of potential failures. Additional relay failure detection circuit allows for alerts when a failure occurs.
Each outlet is equipped with a relay to allow for manual or automatic switching. Sequential outlet sequencing built-in to minimize inrush current.
Ethernet Port 10/100Mbps
10/100 Base-T Ethernet port. Supports: SSH, Web Server, SNMP, SMTP, NTP, Syslog, HTTP/HTTPS, Telnet, IP4
Hot-Swappable Control Module
PDUs with this feature can hot swap control modules for upgrade or service while maintaining power to the outlets.
Local LCD Display
Color 1.8"TFTLCD or 2x8 Character LCD display Displays PDU metrics, Control and configure settings, Alert notifications
Serial port for access to PDU configuration and data
Environment Sensor Port
Sensors supported: Temp/Humidity
Daisy chain multiple PDUs to reduce network port footprint in the datacenter.
Double Inlet & Dual Circuit
Dual Inlet/Dual Circuit uses two inlets for double power. Unlike ATS (dual inlet for redundancy), Dual Circuit/Inlet essentially combines two PDU's into one enclosure.
Max Input Current (Derated)
2 x 20A (16A)
Input Energy/Power Measurements
Kilowatt hours (kWh), Current RMS (A), Line Frequency (Hz), Voltage RMS (V), Active Power (W), Apparent Power (VA), Power Factor
Total Number of Outlets
Outlet Current Measurement
17.00" x 3.50" x 7.88"
Maximum Operating Elevation
0-10,000 ft / 0 - 3,000 m
Operating Temperature Range
0C to +65C
Access & Communications
SNMP V1,2,3, HTTP(S) API, Web Interface, SMTP, Syslog, Telnet, SSH, Ping, DHCP, NTP
Serial Communication (OOB)
RJ45 RS232 Serial and USB-Serial (FTDI)
1 x USB 2.0 1 x USB-Serial (FTDI) 2 x Sensor Ports 1 x 10/100 BaseT Ethernet 1 x RJ45 RS232 Serial
Front Panel LCD
Allow/Restrict users to manage networking & outlet configuration.
Updates with an active internet connection, remotely with web GUI, locally with USB Flash Drive
Attached NEMA L5-20P Plug
2U Mounting Brackets with M4 Screws
Quick Start Guide Reference Pamphlet
SynLink Brochure (PDF)
SynLink Mining OS Beta
How To Buy
Terms of Agreement
SynLink Live Demo
SynLink Desktop App
Documents & Downloads
Returns & Accepted Payment Options
Sign up for updates
2629 Ariane Drive, San Diego, CA 92117
© 2021 Synaccess LLC. All Rights Reserved.