Secure and Remote Outlet Management In A Compact Form Factor
Securely and remotely manage 4 individual outlets. Collect energy measurements include kWh along with current RMS measurements on the outlet level. Switch outlets with confidence with SynLink Relay Health Monitoring. With an enterprise suite of networking protocols, integrate this compact PDU with ease.
We're here to help. Call +1 619-209-8077 orSend us an Email
Contact Us for a Quote
Datasheet
Customizearrow_downward
Included Features
Inlet Energy Monitor
Energy Metrics: Voltage (V), Current (A), Active Power (W), Line Frequency, Active Power, Active Energy, Reactive Energy, Power Factor
Outlet Current Meter
Current (A) is measured at each outlet
Outlet Switching
Each outlet is equipped with a relay to allow for manual or automatic switching. Sequential outlet sequencing built-in to minimize inrush current.
Relay Health Monitor
Proprietary firmware keeps track of key relay health indicators to alert the user of potential failures. Additional relay failure detection circuit allows for alerts when a failure occurs.
2 x Expansion Ports for daisy chaining,
1 x USB 2.0
1 x USB-Serial (FTDI)
2 x Sensor Ports
1 x 10/100 BaseT Ethernet
1 x RJ45 RS232 Serial
Front Panel LCD
Allow/Restrict users to manage networking & outlet configuration.
Firmware Upgrade
Updates with an active internet connection, remotely with web GUI, locally with USB Flash Drive
Output
Outlet Voltages
120V,208V,240V
Outlet Receptacles
NEMA 5-20(4),
C13(4)
Total Number of Outlets
4
Overload Protection
None
Outlet Switching
Included
Outlet Current Measurement
Included
Physical
Form Factor
Compact
Dimensions (hwd)
9" x 1.75" x 5.8"
Operating Temperature Range
0C to +65C
Relative Humidity
5-95% (non-condensing)
Maximum Operating Elevation
0-10,000 ft / 0 - 3,000 m
Relay Outputs
Output Type
Terminal block with screws (NC, NO, and common)
Nominal Switching Capacity (res.load)
3A 120VAC
Max Switching Current
3A (AC/DC)
Max Switching Voltage
125VAC / 24DC
Max Switching Power
360VA
Number of Relay Outputs
2
Control Power to Outlets Manually and Automatically
Use a modern web interface to control outlets and outlet groups
remotely. Program outlets to cycle with a variety of triggers (ping,
scheduling, current thresholds, voltage dips, temperature thresholds,
and more).
Accurately Measure Energy and Power Metrics
Measure input-level energy monitoring (Voltage, Power factor, kWh) and
outlet-level power metering over time. Identify when equipment has
failed and access energy and power metrics over IP with a modern web
interface or well defined APIs.
Use
SynLink Desktop
to provision PDUs within your local network with the SynLink Auto-Scan
Tool securely. Create custom outlet groups from various PDUs to
aggregate power consumption metrics or turn off/on outlets in batches.
Access PDUs from separate networks via SynLink Cloud for simplified
remote access (coming soon).
Set Alerts and Automatically Recover Devices
Configure email alerts whenever thresholds are met. Measure device power
and automatically notify and recover devices when normal power
consumption is interrupted.
Ports & Slots
Controller Front Panel Ports
1.USB-Serial (FTDI)
2.USB 2.0
3.Sensor Port A OR Serial Port (RS232)
4.Expansion Port
5.Color LCD Display
6.LCD Buttons
7.Power Status LED
8.Ethernet Port 10/100 Base T
9.Dedicated Sensor Port B
10.Reset Pin
Ports & Slots
Controller Front Panel Ports
1.USB-Serial (FTDI)
2.USB 2.0
3.Sensor Port A OR Serial Port (RS232)
4.Expansion Port
5.Color LCD Display
6.LCD Buttons
7.Power Status LED
8.Ethernet Port 10/100 Base T
9.Dedicated Sensor Port B
10.Reset Pin
SynLink Series Comparison
Switched Pro+
Remote access. Switched outlets, circuit-level energy monitoring (KWH), and outlet-level power (Amps).
Switched
Remote access. Switched outlets and circuit-level current (Amps).
Monitored
Remote access. Circuit-level energy monitoring (KWH).
Metered
Reliable, Cost-Effective PDU with local current metering